Square split spindle 10 mm offset on both sides to 8 mm
Square solid pin
SQUAR-SPIN-DRFRN-ST-OFFSET-10/8X150
Register now and access more than 125,000 products
- These square spindles can be used to install two door handles with an 8 mm square on a house door
- Due to different door thicknesses and penetration depths in the door handles, these spindles are required in different lengths
Please note that the fastening screws for the metal fittings must also be changed when using shorter or longer square spindles.
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
Screwing in the grub screw expands the spindle in the handle.
 | |
Material | Steel |
Surface | Zinc plated |
DIN direction | DIN R/L |
Square size | 8 mm/10 mm/8 mm |
Length (L) | 150 mm |
Last viewed
Countersunk head screw with recessed head, H DIN 965, A4 stainless steel, plain
Round head screw with square neck DIN 603, A4 stainless steel
Work overall
Conical countersink HSS Ruko DIN 335 plain form C
Auger drill bit Longlife & Speed
Connection sleeve with bolt For system connector SV 20 E
Shoe accessories
Grid wedge
Low-cut safety shoes, S2
Cleaning brush For concrete and REBAR with M8 connecting thread WIT-RB