Square split spindle 10 mm offset on both sides to 8 mm
Square solid pin
SQUAR-SPIN-DRFRN-ST-OFFSET-10/8X155
Register now and access more than 125,000 products
- These square spindles can be used to install two door handles with an 8 mm square on a house door
- Due to different door thicknesses and penetration depths in the door handles, these spindles are required in different lengths
Please note that the fastening screws for the metal fittings must also be changed when using shorter or longer square spindles.
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
Screwing in the grub screw expands the spindle in the handle.
 | |
Material | Steel |
Surface | Zinc plated |
DIN direction | DIN R/L |
Square size | 8 mm/10 mm/8 mm |
Length (L) | 155 mm |
Last viewed
Pipe fastening clamp Multifix DIN 3016, form RSGU/D1, W5/EPDM
Dry sandpaper roll Mirka Caratflex
Abrasive cloth Roll, metal
Safety goggles accessories
Heat-shrink crimp connector, HIGH-END flat plug-in sleeve
High-performance anchor with hexagon head bolt W-HAZ-S/A4
Countersunk tapping screw with tip, shape C with AW drive WN 112, A2 stainless steel
ASME B18.8.1 steel yellow zinc-plated
Plug-in car suction nozzle
Hexagonal bolt, with thread to head and fine thread DIN 961, steel, strength class 10.9, zinc-nickel-plated, transparent passivated (P3E)