Stain retouching pen

Name: Stain retouching pen
Brand: Würth
SKU: 0890403402

Stain colour pen
SAICOLPEN-BEECH/LARCH-7G

Art.-no. 0890403402

EAN 4052712338632

All versions

Specification

For colouring scratches, holes and chafe marks as well as pre-colouring damaged areas.

Large selection of colours for a wide range of different wood colour tones

Easy to paint

Can be painted with a variety of paints

Good adhesion

Excellent adhesion to painted and wooden surfaces

Resistant to smearing and scratch-resistant

Easy and quick to apply

No brush or paint pot required

Ready to use immediately and quick-drying

Notice

Suitable for indoor use.

Please follow the application instructions included with each assortment pack precisely.

Please note that the colours shown may differ from the original colour for printing-related reasons.

No adhesion to PE/PP and limited adhesion to UV-hardened paint systems and powdered paint.

The above application instructions are recommendations given on the basis of our own tests and experience. We recommend that you carry out your own tests before use. Due to the great variety of different applications and storage and processing conditions, we cannot guarantee a particular application result. We will not accept legal liability for any advice or technical information provided by our free customer hotline unless this advisory service and/or technical information is part of the contractually agreed performance owed by us, or the customer service employee acted willfully or intentionally. We guarantee the consistent quality of our products and reserve the right to make technical changes and improvements.

Application

Application area

Glaze stain for transparent colouring of scratches, holes and chafe marks on real wood surfaces. Quick-drying, resistant to smearing and can be painted. Recommended for indoor use.

Instructions

Removing and roughening touch-up areas in order to obtain an absorbent surface. Colour light edges and scratches with short strokes.

Put the cap back on the pen immediately after use. After applying the colour, spray with mist-free matt (art. no. 0893 188 2) or semi-gloss clear varnish (art. no. 0893 188 3) to protect the surface. For more information, please refer to the technical data sheet.

Technical information

Chemical basis	Ink, dye solution
Colour	Beech, Larch
Density	0.9 g/cm³
Density conditions	at 20°C
Min. dust-drying time	1 min
Max. dust-drying time	2 min
Min. grip strength	5 min
Grip strength conditions	depending on room temperature and layer thickness
Min. flashing point	23 °C
Ignition temperature	270 °C
Resistance against	Water
Shelf life from production	0 Month