Stand-off installation system AMO^®-Therm

Name: Stand-off installation system AMO ® -Therm
Brand: Würth
SKU: 0913001016

Adapter w thread fitt., zinc plt. steel, AMO-Therm
ADAPT-AMOTHERM-SET-ANC-8.8-M12/M16X320

Art.-no. 0913001016

EAN 4053479380476

All versions

Specification

High load-bearing spacer installation system with thermal separation on insulated and non-insulated surfaces. With pre-assembled threaded rod made of zinc-plated steel

Quick and easy installation

Thermal bridge-reduced element for connecting and transferring loads from the attached part to the substrate

The thermal separation adapter in a plastic cone interrupts the thermal bridge and prevents heat loss to the outside

Secure attachment with approval for high loads in a wide range of building materials

When anchoring in a substrate with the injection mortars WIT-VM 250, WIT-VM 200 and WIT PM 200

Usable lengths from 80 to 300 mm can be covered with an AMO-Therm

Individual and flexible length setting using the adapter with commercially available threaded rods with acceptance test certificate 3.1

Application

Application area

Attachment with low thermal loss to insulated substrates indoors and outdoors, in walls, facing insulation on ceilings, non-bearing façades

e.g. awnings, canopies, post box systems, satellite systems, lighting equipment, light wells, air-conditioning units, brackets, grids, metal structures, balcony railings, balcony privacy screens etc.

Can be used in different building materials

Solid and hollow sand-lime brick, normal and lightweight concrete, cracked and non-cracked concrete, aerated concrete, solid and vertically perforated brick

Can be used outdoors, in humid areas and close to the sea

External parts made from stainless steel.

Suitable for cotter-pin installation

Technical information

Connection thread (1)	M12
Material of connection thread (2)	Stainless steel A4
Diameter threaded rod (3)	M16
Material of threaded rod (4)	Steel
Surface of threaded rod	Zinc plated
Length (5)	385 mm