Stand-off installation system AMO®-Therm
Adapt. w. thread. fitt., sst A4, AMO-Therm
ADAPT-AMOTHERM-SET-ANC-A4-80-M12/M16X320
Register now and access more than 125,000 products
Quick and easy installation
Thermal bridge-reduced element for connecting and transferring loads from the attached part to the substrate
The thermal separation adapter in a plastic cone interrupts the thermal bridge and prevents heat loss to the outside.
Secure attachment with approval for high loads in a wide range of building materials
When anchoring in a substrate with the injection mortars WIT-VM 250, WIT-VM 200 and WIT PM 200
Usable lengths from 80 to 300 mm can be covered with an AMO-Therm
Individual and flexible length setting using the adapter with commercially available threaded rods with acceptance test certificate 3.1
Datasheets(X)
CAD data (available after login)
Attachment with low thermal loss to insulated substrates indoors and outdoors, in walls, facing insulation on ceilings, non-bearing façades
e.g. awnings, canopies, post box systems, satellite systems, lighting equipment, light wells, air-conditioning units, brackets, grids, metal structures, balcony railings, balcony privacy screens, etc.
Can be used in different building materials
Solid and hollow sand-lime brick, normal and lightweight concrete, cracked and non-cracked concrete, aerated concrete, solid and vertically perforated brick
Can be used outdoors, in humid areas and close to the sea
External parts made from stainless steel.
Suitable for pre-positioned installation
Connection thread (1) | M12 |
Material of connection thread (2) | Stainless steel A4 |
Diameter threaded rod (3) | M16 |
Material of threaded rod (4) | Stainless steel A4 |
Length (5) | 385 mm |
Last viewed
Hexagon socket set screw with ring cutter ISO 4029, A4 stainless steel, 21H, plain
Split pin ISO/WN 1234 steel zinc-plated
Weld-in bulkhead fitting ISO 8434-1, zinc-nickel-plated steel
T-piece EN1254, gunmetal, 3130
Wing nut, round wing shape (German type)
Pipe nipple EN1254, gunmetal, 3530R
S1PL safety shoe New Balance Elite Lite Womens
Cold wood glue D2 Complies with stress group D2 in accordance with DIN EN 204
Sealing plug W.TEC® COVER CAP WP 300 F Polyethylene, natural
Split pin DIN 94, steel, plain