Steel door spindle 8 mm with M12 threaded roller and eccentric drill hole
Change pin with screw and front-end bore
CHPIN-F.DRFRN-THR12-ST-(ZN)-8X100
Register now and access more than 125,000 products
- The steel door spindles are used to connect the knob, button and door handle
- This connection element moves the safety catch
- Due to different door thicknesses and penetration depths in the door handles, these steel door spindles are required in different lengths
Please note that the fastening screws for the metal fittings must also be changed when using shorter or longer steel door spindles.
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
For apartment entrance doors.
The grub screw drills a hole in the square spindle, no slipping.
 | |
Material | Steel |
Surface | Zinc plated |
Length (L) | 100 mm |
Square size | 8 mm |
DIN direction | DIN R/L |
Last viewed
System box
Countersunk head screw with recessed head, H ISO 7046-2, steel 8.8, zinc-plated, blue passivated (A2K)
Tool holder For thermic drill bit
Hexagonal bolt with thread up to the head ISO 4017, brass, nickel-plated
Small abrasive mop Klingspor KMT 614
Akura 44 profile double cylinder for keyed alike systems with original equipment
System assortment 8.4.1, circlip pliers 25 pieces
Screw-fit OPTIMUS shelf support With pins
Belt strap For aluminium ladders
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, plain