Steel door spindle 8 mm with M12 threaded roller and eccentric drill hole
Change pin with screw and front-end bore
CHPIN-F.DRFRN-THR12-ST-(ZN)-8X83
Register now and access more than 125,000 products
- The steel door spindles are used to connect the knob, button and door handle
- This connection element moves the safety catch
- Due to different door thicknesses and penetration depths in the door handles, these steel door spindles are required in different lengths
Please note that the fastening screws for the metal fittings must also be changed when using shorter or longer steel door spindles.
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
For apartment entrance doors.
The grub screw drills a hole in the square spindle, no slipping.
 | |
Material | Steel |
Surface | Zinc plated |
Length (L) | 83 mm |
Square size | 8 mm |
DIN direction | DIN R/L |
Last viewed
Countersunk tapping screw, shape C with AW drive WN 112-compliant, steel, zinc-plated, blue passivated (A2K), shape C, with tip
Belt strap For aluminium ladders
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread (ISO-compliant). Steel, 8.8U, hot-dip galvanised (hdg).
TX BIT EUROFAST
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
DUO-S impact drill bit with straight shank
Raised countersunk tapping screw, C shape with H recessed head
Pan head tapping screw, C shape with H recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), shape C, with tip
Concrete screw with countersunk head W-BS/S
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)