Steel door spindle 8 mm with M12 threaded roller and eccentric drill hole
Change pin with screw and front-end bore
CHPIN-F.DRFRN-THR12-ST-(ZN)-8X90
Register now and access more than 125,000 products
- The steel door spindles are used to connect the knob, button and door handle
- This connection element moves the safety catch
- Due to different door thicknesses and penetration depths in the door handles, these steel door spindles are required in different lengths
Please note that the fastening screws for the metal fittings must also be changed when using shorter or longer steel door spindles.
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
For apartment entrance doors.
The grub screw drills a hole in the square spindle, no slipping.
 | |
Material | Steel |
Surface | Zinc plated |
Length (L) | 90 mm |
Square size | 8 mm |
DIN direction | DIN R/L |
Last viewed
EPS profile double cylinder
ISO 4762 steel 12.9, zinc flake, silver (ZFSHR)
3/8" cardan joint insert short
Stud with threaded end ≈ 1.25 d DIN 939, A2 stainless steel, plain
Ducting clamp DIN3015-3, double series, ribbed inner surface, W.TEC series
Stud screw A2 stainless steel
Neck protector
Work overall
Work overall
Threaded pipe fittings