Steel door spindle 9 mm with M12 threaded roller and eccentric drill hole
Replacement pin with front-end bore
REPLPIN-F.DRFRN-THR12-ST-(ZN)-9X100MM
Register now and access more than 125,000 products
- The steel door spindles are used to connect the button, knob and door handle on a fire or noise protection door
- This connection element moves the safety catch
- Due to different door thicknesses and penetration depths in the door handles, these spindles are required in different lengths
Please note that the fastening screws for the metal fittings must also be changed when using shorter or longer steel door spindles.
Dimensions subject to change. Subject to technical changes.
The grub screw drills a hole in the square spindle, no slipping.
 | |
Material | Steel |
Surface | Zinc plated |
Length (L) | 100 mm |
Square size | 9 mm |
DIN direction | DIN R/L |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
HSS double angle milling cutter DIN 847
Tape measure
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
Dry abrasive paper roll wood KP perfect KP perfect
Locking system, DPS
Door handles Flat on exterior plate
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Hexagon nut
EU HSCo 90° TiAIN long countersink DIN 335C
Countersunk screw with hexagon socket head ISO 10642, steel 10.9, plain
