Steel door spindle 9 mm with M12 threaded roller and eccentric drill hole
Replacement pin with front-end bore
REPLPIN-F.DRFRN-THR12-ST-(ZN)-9X60MM
Register now and access more than 125,000 products
- The steel door spindles are used to connect the button, knob and door handle on a fire or noise protection door
- This connection element moves the safety catch
- Due to different door thicknesses and penetration depths in the door handles, these spindles are required in different lengths
Please note that the fastening screws for the metal fittings must also be changed when using shorter or longer steel door spindles.
Dimensions subject to change. Subject to technical changes.
Datasheets(X)
The grub screw drills a hole in the square spindle, no slipping.
 | |
Material | Steel |
Surface | Zinc plated |
Length (L) | 60 mm |
Square size | 9 mm |
DIN direction | DIN R/L |
Last viewed
Blind rivet, 120° countersunk head
Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032
Countersunk tapping screw type C with H recessed head ISO 7050, A2 stainless steel, plain
Frame for VS TAL Larder wall cupboard full pull-outs
Work coat
Silent-running bearing universal set 36 pieces
1/4" square adapter and 1/4" bit For pneumatic ratchet screwdrivers
Screw with flattened half round head and hexagon socket
AFS 65 angled anchor plate
Drilling jig For escutcheon fittings with WC thumbturn