Steel door spindle 9 mm with M12 threaded roller and eccentric drill hole
Replacement pin with front-end bore
REPLPIN-F.DRFRN-THR12-ST-(ZN)-9X70MM
Register now and access more than 125,000 products
- The steel door spindles are used to connect the button, knob and door handle on a fire or noise protection door
- This connection element moves the safety catch
- Due to different door thicknesses and penetration depths in the door handles, these spindles are required in different lengths
Please note that the fastening screws for the metal fittings must also be changed when using shorter or longer steel door spindles.
Dimensions subject to change. Subject to technical changes.
Datasheets(X)
The grub screw drills a hole in the square spindle, no slipping.
 | |
Material | Steel |
Surface | Zinc plated |
Length (L) | 70 mm |
Square size | 9 mm |
DIN direction | DIN R/L |
Last viewed
Random orbital sander, pneumatic Mirka PROS CV
MFD-S multi-purpose drill bit with straight shank
Cylindrical pin with female thread DIN 7979, steel plain, hardened, tolerance class m6
2-component HS hardener for top coats
Hexagon head bolt with shank for pressure container construction (PED) ISO 4014, steel 25CrMo4, zinc-plated
Locking system DUAL
EPS profile thumbturn cylinder
Cover cap, AW drive For D-anchors
Paint spray, high gloss
Countersunk head screw with recessed head, H DIN 965, steel 4.8, nickel-plated (E2J)