Steel door split spindle 8 mm with M12 threaded roller
Change pin with thread roll for flat entrance door
CHPIN-F.DRFRN-THR12-ST-(ZN)-8X105MM
Register now and access more than 125,000 products
- The steel door spindles are used to connect the knob, button and door handle
- This connection element moves the safety catch
- Due to different door thicknesses and penetration depths in the door handles, these steel door spindles are required in different lengths
Please note that the fastening screws for the metal fittings must also be changed when using shorter or longer steel door spindles.
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
For apartment entrance doors.
Screwing in the grub screw expands the spindle in the handle.
 | |
Suitable for door handle | DH Nuevo |
Material | Steel |
Surface | Zinc plated |
Length (L) | 105 mm |
Square size | 8 mm |
DIN direction | DIN R/L |
Last viewed
Work jacket
Hexagonal bolt with flange
Low-cut safety shoes, S1P
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
Countersunk tapping screw, shape C with hexalobular drive ISO 14586, A2 stainless steel, shape C (with tip)
1-inch impact socket wrench insert hexagon, metric, long
EPS profile double cylinder
Wire cable barrel terminal with nut, left-hand thread
Twist drill bit HSCo DIN 340 type RN OXIDE
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, brass, plain