Steel nail
Nail steel zinc plated countersunk head
NL-CS-(A2K)-3,5X80
Register now and access more than 125,000 products
Firing bolt quality
Bainitically hardened, therefore exceptionally hard yet also tough and elastic.
The harder the wall, the shorter the nail. The softer the surface, the longer the nail.
High-carbon steel nails are used to secure metal sheets, fibre board, formwork wooden slats etc. on masonry and concrete of limited and medium hardness.
 | |
Nominal diameter (d1) | 3.5 mm |
Length (l1) | 80 mm |
Head diameter | 6.5 mm |
Material | Steel |
Surface | Zinc plated |
Head type | Countersunk head |
Weight of content | 0.6 kg |
RoHS-compliant | Yes |
Datasheets (1)
CAD data (available after login)
Certificates/ Documents (0)
Last viewed
Pull handle ST/A210
Work overall
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head and hexalobular drive
Grooved cylindrical pin with chamfer ISO 8740, A1 stainless steel
Spacer washer
Protective glove, disposable
Cutting disc Klingspor A 60 TZ Special
Shoe accessories
Hexagonal nut with flange and clamping piece (all-metal) according to MBN standard
ASSY® 4 CS fittings screw Steel zinc plated full thread countersunk head
