Stepped drill bit
Stepped drill bit HSS plain CBN Ruko
SPRLSTUFBO-RUKO-101350-9-HSS-D4-12
Register now and access more than 125,000 products
The deep-ground and spiral groove offers absolute smoothness and high cutting performance. In particular, non-breaking chips are transported away cleanly as with a twist drill bit. This reduces the formation of built up edges and cold welds on cutting edges. The taper facilitates retraction in drilled-through sheet metal.
Cutting material | HSS |
Surface | Plain |
Angle of the tip | 118 Degree |
Length (l1) | 65 mm |
Shank diameter | 6 mm |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Mechanic's glove Ansell HyFlex 11-542
Cable gland, polyamide Metric according to EN 60423/EN 62444
Work coat
Tallinn 3-in-1 parka
ISO 4762 steel 12.9, zinc flake, silver (ZFSHR)
Threaded piece
Installation box, bath tub, flush-mounted mixer, masonry
Twist drill bit assortment HSCo DIN 338 type RN Oxide 19 pieces
Slotted countersunk head screw DIN 963, brass, plain
K Plus insulation pipe clamp With separate insulation part
