Stepped drill bit, spiral
Stepped twist drill HSS TiAlN f. cable gland Ruko
TWSTSTEPDRIL-RUKO-101090F-HSS-D6,5-40,5
Register now and access more than 125,000 products
The deep-ground and spiral groove offers absolute smoothness and high cutting performance. In particular, non-breaking chips are transported away cleanly as with a twist drill bit. This reduces the formation of built up edges and cold welds on cutting edges. The taper facilitates retraction in drilled-through sheet metal.
Min./max. drill diameter | 6.5-40.5 mm |
Shank diameter | 10 mm |
Shaft length | 24 mm |
Length | 96 mm |
Shank style | 3-face shank |
Surface | TiAlN |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Stretch X shorts
Cylinder head screw, fine thread
Split pin
Electronic welding protection
Hook For aluminium universal ladders
Shaft protection GPN 290 Polyethylene (PE-LD), yellow
Die For standard metric ISO thread HSCo Multi Performance
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Pin punch In accordance with DIN 6450 form C with hardened impact head
Hexagonal bolt with shank
