Stepped drill bit, spiral
Stepped twist drill HSS TiAlN f. cable gland Ruko
TWSTSTEPDRIL-RUKO-101091F-HSS-D5,3-38,5
Register now and access more than 125,000 products
The deep-ground and spiral groove offers absolute smoothness and high cutting performance. In particular, non-breaking chips are transported away cleanly as with a twist drill bit. This reduces the formation of built up edges and cold welds on cutting edges. The taper facilitates retraction in drilled-through sheet metal.
Datasheets(X)
Min./max. drill diameter | 5.3-38.5 mm |
Shank diameter | 10 mm |
Shaft length | 24 mm |
Length | 96 mm |
Shank style | 3-face shank |
Surface | TiAlN |
Last viewed
Support clip, type BB
Drill bushing Ruko steel burnished
Hexagonal bolt with flange
Hexagonal bolt with shank DIN 931, steel 10.9, plain
Heavy-duty side cutters DIN ISO 5749
FLEXEN® Cold rubber endless pipe insulation
Hexagonal bolt, with thread to head and fine thread ISO 8676, steel 12.9, plain
O-ring, metric
TIPP® solid pipe clamp, hot-dip galvanised
Sandpaper strip Useit® Superpad vehicle