Stepped drill bit, spiral
Stepped twist drill HSS TiAlN f. cable gland Ruko
TWSTSTEPDRIL-RUKO-101092F-HSS-D6,5-32,5
Register now and access more than 125,000 products
The deep-ground and spiral groove offers absolute smoothness and high cutting performance. In particular, non-breaking chips are transported away cleanly as with a twist drill bit. This reduces the formation of built up edges and cold welds on cutting edges. The taper facilitates retraction in drilled-through sheet metal.
Datasheets(X)
Min./max. drill diameter | 6.5-32.5 mm |
Shank diameter | 10 mm |
Shaft length | 22 mm |
Length | 79 mm |
Shank style | 3-face shank |
Surface | TiAlN |
Last viewed
Plumber's sealing screw, colour
Work trousers Cetus
Hammer head bolt with square neck DIN 186, A4 stainless steel, plain
Connecting technology
Plumber's sealing screw, colour
EPS profile thumbturn cylinder
Screw with flattened half round head with collar and hexagon socket
Snap ring for bearing with ring groove
Straight male fitting ISO 8434-1, stainless steel 1.4571, BSPP male thread with seal
Concrete screw stair bolt LONG W-BS/S