Stepped drill bit, spiral
Stepped twist drill HSS TiN f. cable gland Ruko
TWSTSTEPDRIL-RUKO-101093T-HSS-D5,3-30,5
Register now and access more than 125,000 products
The deep-ground and spiral groove offers absolute smoothness and high cutting performance. In particular, non-breaking chips are transported away cleanly as with a twist drill bit. This reduces the formation of built up edges and cold welds on cutting edges. The taper facilitates retraction in drilled-through sheet metal.
Datasheets(X)
Min./max. drill diameter | 5.3-30.5 mm |
Shank diameter | 10 mm |
Shaft length | 22 mm |
Length | 79 mm |
Shank style | 3-face shank |
Surface | TiN |
Last viewed
Fitting Brass, 10107
Stud with threaded end ≈ 1 d DIN 938, steel 10.9, zinc-plated, blue passivated (A2K)
ABS Lock III support tube
Hexagonal bolt with thread up to the head
Welding blanket
Locking system DUAL
ASSY® 4 RCS fittings screw Steel zinc plated full thread raised countersunk head
TIME-SERT® threaded bushing
Twist drill bit HSCo DIN 340 type RN OXIDE
Low-cut safety shoes, S2