Stepped drill bit, spiral
Stepped twist drill HSCo plain inch Ruko
TWSTSTEPDRIL-RUKO-101705E-HSSE-D5/16-1
Register now and access more than 125,000 products
The deep-ground and spiral groove offers absolute smoothness and high cutting performance. In particular, non-breaking chips are transported away cleanly as with a twist drill bit. This reduces the formation of built up edges and cold welds on cutting edges. The taper facilitates retraction in drilled-through sheet metal.
Datasheets(X)
Min./max. drill diameter | 5/16-1 in |
Shank diameter | 3/8 in |
Shaft length | 20 mm |
Length | 3-1/4 in |
Shank style | 3-face shank |
Surface | Plain |
Last viewed
Countersunk head screw with nib and nut
Key fob Square
Hexagonal bolt with shank ISO 4014, steel 10.9, plain
Countersunk screw with hexalobular head
Airtight and windproof membrane collar WÜTOP® Thermo For openings in vapour retarders and roofing sheeting with high temperature requirements
Cetus fleece jacket
SNAP marker
Hexagonal bolt with shaft, SB fittings, DIN EN 15048-1 ISO 4014, A4-70 stainless steel, plain, with nut ISO 4032
Split pin ISO/WN 1234 steel zinc-plated
Identification rings, PVC