Stepped drill bit, spiral
Stepped twist drill HSS TiN inch Ruko
TWSTSTEPDRIL-RUKO-101707T-HSS-D3/8-1/2
Register now and access more than 125,000 products
The deep-ground and spiral groove offers absolute smoothness and high cutting performance. In particular, non-breaking chips are transported away cleanly as with a twist drill bit. This reduces the formation of built up edges and cold welds on cutting edges. The taper facilitates retraction in drilled-through sheet metal.
Datasheets(X)
Min./max. drill diameter | 3/8-1/2 in |
Shank diameter | 1/4 in |
Shaft length | 20 mm |
Length | 1 7/8 in |
Shank style | 3-face shank |
Surface | TiN |
Last viewed
Work trousers Planam Stretchline trousers 6611
RW® bit
Hexagonal bolt with thread up to the head
Steel spacer stud
Measuring sensor For electronic refrigerant leak detectors
Plastic heat pump pipe
Hexagonal bolt with thread up to the head
Grating/net sanding triangle Mirka Abranet
Single-cut tap for W.TEC® INSERT COIL helical inserts - shape D, made of HSS
Low-cut safety shoes, S3