Stepped drill bit, spiral
Stepped twist drill HSCo plain Ruko
TWSTSTEPDRILL-RUKO-101050-9E-HSSE-D4-12
Register now and access more than 125,000 products
The deep-ground and spiral groove offers absolute smoothness and high cutting performance. In particular, non-breaking chips are transported away cleanly as with a twist drill bit. This reduces the formation of built up edges and cold welds on cutting edges. The taper facilitates retraction in drilled-through sheet metal.
Min./max. drill diameter | 4-12 mm |
Shank diameter | 6 mm |
Shaft length | 20 mm |
Length | 65 mm |
Shank style | 3-face shank |
Surface | Plain |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
EASYLUX WPS-24 LED extension cable
Screw with flattened half round head with collar and hexagon socket
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Spacer block/mounting plate
T-adapter, PA6 MOD BS SGA
Threaded fitting
ASME B18.8.2 steel plain
Adjustable open-end wrench
ASME B18.3 stainless steel 18-8 plain
Shim ring DIN 988, steel, plain
