Stepped drill bit, spiral
Stepped twist drill HSS TiAlN Ruko
TWSTSTEPDRILL-RUKO-101051F-HSS-D4-20
Register now and access more than 125,000 products
The deep-ground and spiral groove offers absolute smoothness and high cutting performance. In particular, non-breaking chips are transported away cleanly as with a twist drill bit. This reduces the formation of built up edges and cold welds on cutting edges. The taper facilitates retraction in drilled-through sheet metal.
Datasheets(X)
Min./max. drill diameter | 4-20 mm |
Shank diameter | 8 mm |
Shaft length | 21 mm |
Length | 75 mm |
Shank style | 3-face shank |
Surface | TiAlN |
Last viewed
WÜPLAST® countersunk head screw with Z Phillips head WN 1413, steel 10.9, zinc-nickel-plated, black passivated (P3R)
Capstan screws with slot DIN 404, steel 5.8, zinc-plated, blue passivated (A2K)
Hexagon Socket Head Cap Screw
Aluminium runged leaning ladder Lightweight and strong
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 8.8, plain
Hexagonal bolt with thread up to the head
Work jacket
Countersunk rivet
Work jacket
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 8.8, plain