Stepped drill bit, spiral
Stepped twist drill HSS TiN Ruko
TWSTSTEPDRILL-RUKO-101053T-HSS-D6-38
Register now and access more than 125,000 products
The deep-ground and spiral groove offers absolute smoothness and high cutting performance. In particular, non-breaking chips are transported away cleanly as with a twist drill bit. This reduces the formation of built up edges and cold welds on cutting edges. The taper facilitates retraction in drilled-through sheet metal.
Datasheets(X)
Min./max. drill diameter | 6-38 mm |
Shank diameter | 10 mm |
Shaft length | 24 mm |
Length | 100 mm |
Shank style | 3-face shank |
Surface | TiN |
Last viewed
1/2" multi-socket wrench one tool for all applications
Hexagon nut with fine thread DIN 934, steel I10I, zinc-plated, blue passivated (A2K)
O-ring, metric
HSCo8 end mill, short, centre-cutting DIN 844K
Low-cut safety shoes, S2
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel 10.9, zinc-plated, blue passivated (A2K)
Hole puncher with splitting punch Metric ISO sizes in accordance with EN 50262
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, A4-070 stainless steel, plain
PUR 250 type 175 insulation pipe clamp With screws, a permanent PUR hard foam coating and rubber shell on the inside
T-handle wrench, hexagon socket With side tip