Stepped drill bit, spiral
Stepped twist drill HSS plain Ruko
TWSTSTEPDRILL-RUKO-101057-HSS-D6-32
Register now and access more than 125,000 products
The deep-ground and spiral groove offers absolute smoothness and high cutting performance. In particular, non-breaking chips are transported away cleanly as with a twist drill bit. This reduces the formation of built up edges and cold welds on cutting edges. The taper facilitates retraction in drilled-through sheet metal.
Datasheets(X)
Min./max. drill diameter | 6-32 mm |
Shank diameter | 10 mm |
Shaft length | 22 mm |
Length | 75 mm |
Shank style | 3-face shank |
Surface | Plain |
Last viewed
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Retaining pin For square holes in perforated plates, workshop trolleys and the ORSY®1 shelving systems
Screw with flattened half round head and hexagon socket
EPS profile double cylinder
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
Parallel pin, unhardened ISO 2338 steel plain (m6)
GPN 690 protective cap Polyethylene (PE-LD/PE-LLD), yellow
Screw with flattened half round head with hexagon socket, imperial
Countersunk tapping screw shape F with H recessed head DIN 7982, steel, zinc-plated, blue passivated (A2K)
EPS profile thumbturn cylinder for keyed alike systems with original equipment