Stepped drill bit, spiral
Stepped twist drill HSS TiN Ruko
TWSTSTEPDRILL-RUKO-101058T-HSS-D5-28
Register now and access more than 125,000 products
The deep-ground and spiral groove offers absolute smoothness and high cutting performance. In particular, non-breaking chips are transported away cleanly as with a twist drill bit. This reduces the formation of built up edges and cold welds on cutting edges. The taper facilitates retraction in drilled-through sheet metal.
Min./max. drill diameter | 5-28 mm |
Shank diameter | 10 mm |
Shaft length | 22 mm |
Length | 69 mm |
Shank style | 3-face shank |
Surface | TiN |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Tapping screw countersunk
Low-cut safety shoes S3
ASSY®plus 4 A2 PH SOLAR roof hook screw A2 stainless steel plain partial thread pan head
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
Wide sanding belt Klingspor PS 29 F ACT
Work trousers
Countersunk head screw with hexagon socket ISO 10642, A2-070 stainless steel, plain
SC short twist drill bit DIN 6539
Lock washer for shaft, stored
Installation box shower tray flush-mounted mixer masonry
