Stepped drill bit, spiral
Stepped twist drill HSS plain short design Ruko
TWSTSTEPDRILL-RUKO-101061-HSS-D4-12
Art.-no. 1971008136
EAN 4007140075505
Register now and access more than 125,000 products
The deep-ground and spiral groove offers absolute smoothness and high cutting performance. In particular, non-breaking chips are transported away cleanly as with a twist drill bit. This reduces the formation of built up edges and cold welds on cutting edges. The taper facilitates retraction in drilled-through sheet metal.
Datasheets(X)
Min./max. drill diameter | 4-12 mm |
Shank diameter | 6 mm |
Shaft length | 20 mm |
Length | 48 mm |
Shank style | 3-face shank |
Surface | Plain |
Last viewed
Hexagonal bolt with thread up to head for pressure container construction DIN EN ISO 4017, A4 stainless steel
Hexagon bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated thick-film passivated (ZSML)
Hex head screw with shank ISO 4014, steel 8.8U, hot-dip galvanised
Screw, hexagon head with shaft ISO 4014, plain A4-80 stainless steel
Wedge lock washer W.TEC series, wide shape
1/2 inch socket wrench hexagon socket long
Cup-shaped mask CM 3000, carbon V FFP2 NR D
Hexagon bolt with shank ISO 4014, steel 10.9, zinc-plated, blue passivated (A2K)
Safety knife Martor SECUMAX 148 148001
Hexagon bolt with shank ISO 4014, A4-50 and A4-70 stainless steel, plain