Stepped drill bit, spiral
Stepped twist drill HSS plain f. cable gland Ruko
TWSTSTEPDRILL-RUKO-101092-HSS-D6,5-32,5
Register now and access more than 125,000 products
The deep-ground and spiral groove offers absolute smoothness and high cutting performance. In particular, non-breaking chips are transported away cleanly as with a twist drill bit. This reduces the formation of built up edges and cold welds on cutting edges. The taper facilitates retraction in drilled-through sheet metal.
Min./max. drill diameter | 6.5-32.5 mm |
Shank diameter | 10 mm |
Shaft length | 22 mm |
Length | 79 mm |
Shank style | 3-face shank |
Surface | Plain |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Key rosette pair AL 30
Work trousers
Cover cap for 3D hinges
Blind plug SKINDICHT PS
Swivel hoist ring QC 8
End piece For LFK cable routing conduit
Blind rivet, 120° countersunk head
EU HSCo 90° TiAIN long countersink DIN 335C
HSS-short stepped drill bit
Hexagonal bolt with shank ISO 4014, steel 10.9, plain
