Stepped drill bit, spiral
Stepped twist drill HSS plain inch Ruko
TWSTSTEPDRILL-RUKO-101707-HSS-D3/8-1/2
Register now and access more than 125,000 products
The deep-ground and spiral groove offers absolute smoothness and high cutting performance. In particular, non-breaking chips are transported away cleanly as with a twist drill bit. This reduces the formation of built up edges and cold welds on cutting edges. The taper facilitates retraction in drilled-through sheet metal.
Datasheets(X)
Min./max. drill diameter | 3/8-1/2 in |
Shank diameter | 1/4 in |
Shaft length | 20 mm |
Length | 1-7/8 in |
Shank style | 3-face shank |
Surface | Plain |
Last viewed
Safety boots, S3
Screw, hexagon head with shaft
Longitudinal bar For boltless rack
Dry sandpaper strip Klingspor PL 31 B
Turnbuckle sleeve, open form DIN 1480 (open shape), steel S235JR, hot-dip galvanised (hdg)
Hexagonal bolt with flange
Countersunk slotted head screw, Z
Staples for hand-held stapler and hammer tacker
Crimp cable lug, ring shape Polyamide insulated
High-visibility jacket