Stepped drill bit, spiral
Stepped twist drill HSCo plain inch Ruko
TWSTSTEPDRILL-RUKO-101708E-HSSE-D1
Register now and access more than 125,000 products
The deep-ground and spiral groove offers absolute smoothness and high cutting performance. In particular, non-breaking chips are transported away cleanly as with a twist drill bit. This reduces the formation of built up edges and cold welds on cutting edges. The taper facilitates retraction in drilled-through sheet metal.
Shank diameter | 3/8 in |
Shaft length | 20 mm |
Length | 2-19/32 in |
Shank style | 3-face shank |
Surface | Plain |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Blind rivet, open, with break mandrel and flat head ISO 15977, dome head, aluminium/steel
Work polo shirt ST802
Hexagon nut, type B/A4 DIN 934 A4 stainless steel, with washer, in accordance with DIN EN ISO 7089 (DIN 125), A4 stainless steel
Round head screw with slot and nut W-0231, steel 04.8, zinc-plated with nut, slotted
EPS profile double cylinder
Detectable markings
EPS profile double cylinder
Fire protection duct outer corner I30/I60/I90/I120
Furniture handle screw For attaching furniture handles with M4 connecting threads and combination slot drive
System insert, plastic, 4.4.1
