Stepped drill bit, spiral
Stepped twist drill HSS TiAlN inch Ruko
TWSTSTPDRL-RUKO-101701F-HSS-D3/16-1/2
Register now and access more than 125,000 products
The deep-ground and spiral groove offers absolute smoothness and high cutting performance. In particular, non-breaking chips are transported away cleanly as with a twist drill bit. This reduces the formation of built up edges and cold welds on cutting edges. The taper facilitates retraction in drilled-through sheet metal.
Min./max. drill diameter | 3/16-1/2 in |
Shank diameter | 1/4 in |
Shaft length | 20 mm |
Length | 3-1/8 in |
Shank style | 3-face shank |
Surface | TiAlN |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Flat blade fuse MINI-FLP Silver
HPC Speedcut 4.0 Universal end mill, extra long XL, optional, four blades, uneven angle of twist gradient, HA shank
Single-cut tap for W.TEC® INSERT COIL helical inserts - shape D, made of HSS
Stud with head, shape B
Shim ring DIN 988, steel, plain
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
Y-shaped push-in fitting
Infrared laser thermometer
HSCo Multi Performance machine tap for blind holes DIN 371/376
Countersunk screw with hexagon socket head ISO 10642, steel 10.9, plain
