Stepped drill bit, spiral
Stepped twist drill HSCo plain inch Ruko
TWSTSTPDRL-RUKO-101702E-HSSE-D1/8-1/2
Register now and access more than 125,000 products
The deep-ground and spiral groove offers absolute smoothness and high cutting performance. In particular, non-breaking chips are transported away cleanly as with a twist drill bit. This reduces the formation of built up edges and cold welds on cutting edges. The taper facilitates retraction in drilled-through sheet metal.
Datasheets(X)
Min./max. drill diameter | 1/8-1/2 in |
Shank diameter | 1/4 in |
Shaft length | 20 mm |
Length | 3 1/8 in |
Shank style | 3-face shank |
Surface | Plain |
Last viewed
Dynamoov Soft-close full-extension concealed slide With integrated soft-close system
Countersunk tapping screw shape C with H recessed head DIN 7982, A2 stainless steel, with tip
Work poloshirt
Countersunk tapping screw, shape C with hexalobular drive
Inside corner for LFK cable routing conduit
Pipe clamp According to DIN 3567, shape A
Natural stone sealant 4 in 1
Soft-face hammer Halder SIMPLEX soft-face hammer Series 3029
HSCo Multi Longlife machine tap for blind holes DIN 371/376
Replacement spray head For spray cans