Stepped drill bit, spiral
Stepped twist drill HSS TiN inch Ruko
TWSTSTPDRL-RUKO-101704T-HSS-D3/16-7/8
Register now and access more than 125,000 products
The deep-ground and spiral groove offers absolute smoothness and high cutting performance. In particular, non-breaking chips are transported away cleanly as with a twist drill bit. This reduces the formation of built up edges and cold welds on cutting edges. The taper facilitates retraction in drilled-through sheet metal.
Min./max. drill diameter | 3/16-7/8 in |
Shank diameter | 3/8 in |
Shaft length | 20 mm |
Length | 3-1/4 in |
Shank style | 3-face shank |
Surface | TiN |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Hexagonal bolt with flange in accordance with MBN standard
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 8.8, zinc-plated blue passivated (A2K)
ASME B18.21.1 steel zinc-plated yellow
Feather key, high profile DIN 6885, A4 stainless steel, plain, shape A
Reflector nozzle
FLEXEN® cold rubber Plus S2 continuous coil pipe insulation
Vulcanised fibre disc VSM ZF713
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc-plated, blue passivated (A2K)
Cut protection glove Ansell HyFlex 11-561
Trizact® hook-and-loop fabric disc
