Stepped/twist drill bit assortment
Stepped drill bit HSS plain assort. 3 pcs Ruko
TWSTSTEPDRILL-RUKO-101326-HSS-3PCS
Register now and access more than 125,000 products
The deep-ground grooves on stepped drill bits with 3 cutting edges ensure entirely chatter-free working. Due to the lower cutting edge load, a higher feed rate is possible, especially in soft materials such as non-ferrous metals. The taper facilitates retraction in drilled-through sheet metal.
Diameter 4.0-12.0 mm/4.0-20.0 mm/4.0-30.0 mm
Datasheets(X)
Number of pieces in assortment/set | 3 PCS |
Shank style | 3-face shank |
Last viewed
Single wire seal (SEAL) For uninsulated cable connector
Complete printed Classic number plate holder
TIME-SERT® threaded bushing
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel, strength class 10.9, zinc-nickel-plated, black (ZNBHL)
Castellated nut, low profile DIN 937, steel 17H/22H, zinc-plated, blue passivated (A2K)
FKM 75 Shore O-ring ISO 3601-1
Blind rivet, open, with break mandrel and flat head ISO 15977, dome head, aluminium/steel
1/4-inch socket wrench insert, TX head For external TX screws
Set screw hexagon socket with knurled ring cutter, inch
Cable grommet CR