Welcome to Würth Aerospace Solutions For trade customers only
Stone and façade sealant - FCDESEAL-STONE-GREY-290ML

Stone and façade sealant

Stone and facade sealant
FCDESEAL-STONE-GREY-290ML

Art.-no. 0892320081
EAN 4045727108079
All versions

Prices for customers after login
Stone and façade sealant

Art.-no. 0892320081

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

High-quality special sealant for connection joints, suitable for painting over

Can be painted over


  • Outstanding adhesion of commercially available paints on sealant

  • Specifically designed to be painted over with emulsion paint


Suitable for natural stone


No discolouration around the edges of natural stone



  • Broad adhesive range

  • Good smoothing properties

  • Permanently elastic

  • Building material class B2, in accordance with DIN 4102

  • Isocyanate and solvent-free

  • Silicone-free


Our products featuring the EMICODE label are low emission/environmentally compatible. The EMICODE classification system awards labels to construction products that comply with the very stringent health and environmental requirements of recognised institutes.

Notice

Not suitable for use in floor joints for traffic routes. Primer surfaces where necessary; see the Polymer Institute approval. Avoid contact with VKP tape.



The joint edges or adhesive surfaces must be solid, load-bearing, clean, dry and free from grease, dust, bitumen and tar. All surfaces must be compatible with the MS polymer within the meaning of DIN 52452 Part 1. Adhesion and compatibility with plastics should be tested on an object-by-object basis. When applying to coated surfaces (e.g. water-repellent façades), test compatibility in advance. Apply pressure to spray the sealant evenly onto the joint edges. Avoid adhesion on three sides. Smooth the surface immediately with a moistened Würth joint smoother. To smooth, use Würth sealant smoothing agent.

Tested in accordance with DIN 18540-F by the German Polymer Institute. Test report P 386.



Tested in accordance with DIN EN 15651 Part 1/Part 4


  • Fire behaviour: Class E

  • Stability under load: ≤ 3mm

  • Volume loss: ≤ 10%

  • Tensile behaviour, tensile stress value at 23°C: ≤ 0.4 MPa

  • Tensile behaviour, tensile stress value at 20°C: ≤ 0.6 MPa

  • Tensile behaviour, tensile stress value at 30°C: ≤ 0.9 MPa

  • Tensile behaviour under tensile stress (EN ISO 8340): Passed

  • Adhesion/expansion at differing temperatures (EN ISO 9047): Passed

  • Elastic recovery: ≥70%

  • Adhesion/expansion after being immersed in water for 28 days (EN ISO 10590): Passed

  • Adhesion/expansion after being stored in salt water (EN ISO 10590): Passed

  • Artificial weathering through UV radiation (EN ISO 11431): Passed

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area
  • Special sealant that can be painted for connection and expansion joints indoors and outdoors, especially for jointing in building construction, e.g. for sealing joints on finished concrete parts

  • The sealant is suitable for use in all areas of construction, e.g. windows, doors and roofs, in wood and metal construction

  • Suitable for natural stone
Instructions

Please observe the "General Notes on Application for Sealants" and "Construction Material Compatibility of Würth Sealants" overview sheet.

Chemical basis

MS polymer

Container

Cartridge

Contents

290 ml

Colour

Grey

Continuous motion absorption

25 %

Min./max. processing temperature

5 to 40 °C

Min./max. temperature resistance

-40 to 80 °C

Min. skin-formation time

75 min

Shore A hardness

20

Ultraviolet resistance

Yes

Recoatable/Can be painted over

Yes

Full curing speed

2.5 mm/d

Silicone-free

Yes

Solvent-free

Yes

Breaking elongation

750 %

Water-vapour diffusion resistance factor value µ

1470

Shelf life from production

12 Month

Sustainability

Pollutants / Emissions

Additive article:
 
Product
Description
Quantity
PU
Price
/PU
Cartridge cutter
Cartridge cutter

CARTKNFE

For cutting plastic cartridges and precision cutting of plastic application nozzles to desired length and angle
x 1 pcs
PE backfill sealant
PE backfill sealant

SEALCORDMATL-PE-6MM

Silicone-free and good joint filling strength
x 100 m
PE backfill sealant
PE backfill sealant

SEALCORDMATL-PE-10MM

Silicone-free and good joint filling strength
x 100 m
PE backfill sealant
PE backfill sealant

SEALCORDMATL-PE-15MM

Silicone-free and good joint filling strength
x 100 m
PE backfill sealant
PE backfill sealant

SEALCORDMATL-PE-20MM

Silicone-free and good joint filling strength
x 50 m
PE backfill sealant
PE backfill sealant

SEALCORDMATL-PE-PE-30MM

Silicone-free and good joint filling strength
x 25 m
PE backfill sealant
PE backfill sealant

SEALCORDMATL-PE-40MM

Silicone-free and good joint filling strength
x 50 m
PE backfill sealant
PE backfill sealant

SEALCORDMATL-PE-50MM

Silicone-free and good joint filling strength
x 50 m
Surface bonding agent Primer for Plastic/Wood/Stone
Surface bonding agent Primer for Plastic/Wood/Stone

PRIM-BONDSEAL-PLA/WO/STN-250ML

Optimisation of plastic, wood, stone and concrete surfaces
Joint smoother Uni
Joint smoother Uni

JNTSMTHR-UNI-SET1-RED-3PCS

Slim shape and high flexibility
Joint smoother Uni
Joint smoother Uni

JNTSMTHR-UNI-SET2-RED-3PCS

Slim shape and high flexibility
Sealant smoothing agent
Sealant smoothing agent

SMTHR-SEAL-5LTR

Universal smoothing agent suitable for all types of sealants
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Suitable glove:
 
Product
Description
Chemical protective glove, Butyl
Chemical protective glove, Butyl
Description:
Permeation level: 6
Gas-tight and resistant to exhaust gases produced by combustion processes
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 3
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Description:
Permeation level: 3
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details