Stone drill bit combi assortment FS 13 pieces
Stone drill bit combi assortment FS 13 pcs
DRL-STN-SORT-COMBI-FS-(6-10)-13PCS
ZEBRA
Register now and access more than 125,000 products
Stoneware drill polygon shaft
- Precise drilling
- Specially designed carbide plate geometry (multi-surface precision grinding)
- Drill depth indicator
- No cooling required
- No slipping in the drill chuck due to novel polygon shaft
MFD-S multi-purpose drill bit
- Precise drilling
- Extra-sharp cemented carbide cutting edges with special diamond grinding on all sides
- Drilling does not break hollow-chamber bricks
- Outstanding, rapid transport of drilling dust
- No slipping in the drill chuck due to ¼" hex shaft
- PGM tested
DUO-S impact drill bit
- Precise drilling
- Hammer-resistant, extremely robust and designed for the toughest applications
- Fast drilling progress
- Suitable for rotary drilling and impact drilling
- No slipping in the drill chuck through ¼" hex shaft
- PGM tested
Porcelain stoneware drill bit
- Max. rotation speed: Diameter 5 mm (800 rpm), diameter 6 and 8 mm (600 rpm), diameter 10 and 12 mm (400 rpm), diameter 14 mm (200 rpm)
- Not suitable for impact drilling. For rotary drilling only.
- Optimum contact pressure: 35-45 kg
- If the recommended drilling speed is observed and the optimum contact pressure applied, but you can no longer hear a "scraping" sound, the drill bit has reached the end of its service life.
- Avoid placing high contact pressure on the drill bit when it is not rotating → Risk of breakage!
- Contact pressure too low and/or drilling speed too high → Service life ends prematurely!
- Avoid tilting and swivelling movements during the drilling process → Risk of breakage!
- We recommend drilling test holes (ideally in waste material from the tiles to be drilled)
- If the 14 mm diameter drill bit is used, pre-drilling must be carried out with an additional drill bit (8 mm).
Multi-purpose drill bit
Not suitable for impact drilling. For rotary drilling only.
For further information, please refer to the individual products.
Datasheets(X)
Porcelain stoneware drill bit
Rotary drilling in porcelain stoneware tiles, tiles, glass (not safety glass) and porcelain. Suitable for electric and especially for battery drills.
Multi-purpose drill bit
Rotary drilling in tiles, solid brick, roofing tiles, hollow brick, stone, marble, wood, plastic, metal etc.
Window installation, drilling through formwork and drilling through hollow-chamber bricks without breakage for a secure anchor hold etc.
Impact drill bit
Impact drilling in concrete, masonry, sand-lime brick and natural stone. Also for rotary drilling in ceramic and marble. Suitable for use in impact drills and rotary drills, as well as in hammer drills with a drill chuck adapter.
Porcelain stoneware drill bit
1. Start the hole with point precision, applying light pressure
2. Switch on the drill
3. Apply full contact pressure → "Scraping" sound must be heard
4. Use reduced contact pressure once the tile has been fully penetrated
Number of pieces in assortment/set | 13 PCS |
Tool holding device | 0 - not applicable |
DRL-IMP-HEX-E-D10-L120-WL80MM
ZEBRADRL-IMP-HEX-E-D6-L100-WL54MM
ZEBRADRL-IMP-HEX-E-D8-L120-WL80MM
ZEBRADRL-GENPURP-MFDS-HEX-E-D10-L120-WL80MM
ZEBRADRL-GENPURP-MFDS-HEX-E-D6-L100-WL54MM
ZEBRADRL-GENPURP-MFDS-HEX-E-D8-L120-WL80MM
ZEBRAJust leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2
Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)
Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)
Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.
Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!