Straight connection piece For hard-to-reach lubrication and manifold points
Connection piece straight
FITT-CLS-CONPIECE-M10X1TAP-M10X1-18MM
Register now and access more than 125,000 products
On central low-viscosity grease lubrication units:
Lines with a diameter of 4 mm are connected to connection pieces with tapered rings and union bolts M8x1.
On central grease lubrication units:
Lines with a diameter of 6 mm are connected to connection pieces with double-tapered rings and union bolts M10x1.
Datasheets(X)
For extension if the lubrication or support point is recessed.
 | |
Connection thread (d2) | M10 x 1 |
Outlet thread (d) | M10 x 1 tapered |
Width across flats (SW) | 13 mm |
Length (L) | 18 mm |
Material | Steel |
Surface | Zinc plated |
Last viewed
G-fuse 5x20
Ventilation grille With oval slot 28 x 5 mm
Carbon monoxide detector Ei208iDWC
Aluminium runged leaning ladder Lightweight and strong
Window and door locking device presentation module
LED Flashpad Step
TwinPad electronic RFID combination lock
Hook-and-loop fastening grinding plate For random orbital sanders ETS 150-3.0-E Power and 150-5.0-E POWER
Pole terminal puller, twin leg, 60 mm span
Base plate for square-perforated panel system