Straight connector For central lubrication units
Straight connector
FITT-CLS-FITTING-STRAIGHT-CON-D6MM
Register now and access more than 125,000 products
- The screw-in threads are tapered and thus self-sealing.
- The size of screw-in thread depends on the lubrication point/manifold point.
The connectors for 4-mm and 6-mm pipe diameters are suitable for use in the low-pressure range only.
Datasheets(X)
For the repair of a defective line
 | |
Suitable for hose external diameter | 6 mm |
Width across flats (SW) | 11 mm |
Width across flats 2 (SW2) | 12 mm |
Material | Steel |
Surface | Zinc plated |
Last viewed
Concealed slide full-extension slide Dynapro With integrated soft-close system
Stud with threaded end ≈ 2d
Pan head tapping screw, shape F with recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), round head, PH drive
Hexagonal bolt with thread up to the head
A2 stainless steel wing handle nut, blasted
Surface protection mat AeroMount
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Hexagon head bolt With collar, Hygienic USIT®
Countersunk head screw with nib and nut
VDE side cutters, DIN ISO 5749 IEC 60900