Straight male fitting ISO 8434-1, stainless steel 1.4571, BSPP male thread with seal
Straight screw-in conn. sst BSPP MT EPDM seal.
TUBFITT-ISO8434-S-SDS-E-A5-D8-G3/8
Register now and access more than 125,000 products
 | |
Thread type x nominal diameter x pitch (T1) | M16 x 1.5 |
Thread type 3 x nominal diameter 3 (T2) | G3/8 |
ISO | 8434 |
Nominal pressure PN | 630 |
Pipe diameter (D1) | 8 mm |
Diameter 2 (D2) | 5 mm |
Width across flats (S1) | 22 mm |
Material | Stainless steel A5, 1.4571, X6CrNiMoTi17-12-2 |
Length 2 (L2) | 34.5 mm |
Length 3 (L3) | 15.5 mm |
Length 8 (i1) | 12 mm |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
RW® bit
FLEXEN® Cold rubber endless pipe insulation
Grooved taper-pin ISO 8744 steel plain
Hexagon nut, low profile with fine thread DIN 439, A4 stainless steel, plain
Ducting clamp DIN3015-2, heavy-duty series, ribbed inner surface, W.TEC series
1C gun foam, PURLOGIC® Top set 12 pieces
GEFU® thread-rolling screw With Taptite 2000® thread, flattened half round head with collar and hexalobular drive
Charger 12 volt AL 30-LI For rechargeable battery LI 10.8 volt and 12 volt
ASSY® 4 A2 RCS wood façade screw A2 stainless steel plain partial thread raised countersunk head
Stud with threaded end ≈ 1 d DIN 938, A4/70 stainless steel, plain
