Straight male fitting ISO 8434-1, stainless steel 1.4571, tapered BSPT male thread
Straight screw-in connector sst taper. BSP MT
TUBFITT-ISO8434-L-SDSC-A5-D10-R1/4
Register now and access more than 125,000 products
Datasheets(X)
 | |
Thread type x nominal diameter x pitch (T1) | M16 x 1.5 |
Thread type 3 x nominal diameter 3 (T2) | R1/4 |
ISO | 8434 |
Nominal pressure PN | 315 |
Pipe diameter (D1) | 10 mm |
Diameter 2 (D2) | 7 mm |
Width across flats (S1) | 17 mm |
Width across flats 2 (S2) | 19 mm |
Material | Stainless steel A5, 1.4571, X6CrNiMoTi17-12-2 |
Length (L1) | 36 mm |
Length 2 (L2) | 28 mm |
Length 3 (L3) | 21 mm |
Length 8 (i1) | 12 mm |
Last viewed
Countersunk head screw with hexagon socket
TX bit C 6.3 (1/4 inch) with hole
Flat washer For hexagon head bolts and nuts
Hammer-in anchor W-SD with internal thread
HPC Speedcut 4.0 Inox end mill, long, four blades, uneven angle of twist gradient, with internal cooling, HA shank
Twist drill bit HSCo DIN 338 type RN oxide
Resin container I30
1/2" socket wrench insert Triple square, short
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
EPS profile thumbturn cylinder