Straight male fitting ISO 8434-1, zinc-nickel-plated steel, BSPP male thread with seal
Straight screw-in fitting ST BSPP M EPDM sealing
TUBFITT-ISO8434-S-SDSC-E-ST-D8-G1/4
Register now and access more than 125,000 products
Datasheets(X)
 | |
Thread type x nominal diameter x pitch (T1) | M16 x 1.5 |
Thread type 3 x nominal diameter 3 (T2) | G1/4 |
ISO | 8434 |
Nominal pressure PN | 630 |
Pipe diameter (D1) | 8 mm |
Diameter 2 (D2) | 5 mm |
Width across flats (S1) | 19 mm |
Width across flats 2 (S2) | 19 mm |
Material | Steel |
Surface | Zinc nickel |
Length (L1) | 42 mm |
Length 2 (L2) | 34 mm |
Length 3 (L3) | 15 mm |
Length 8 (i1) | 12 mm |
Last viewed
Washer ISO 7089 brass nickel-plated (E2J)
TX bit with hole
Arcori Plus S3 FLEXITEC® safety boots
1/2 inch impact socket wrench insert For external TX screws, short
ASSY® 4 CSMP ZiNi timber screw Steel zinc-nickel partial thread countersunk milling pocket head
Heating seal assortment 242 pieces in system case 4.4.1
Grooved taper-pin ISO 8744 steel plain
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, plain
Split pin ISO 1234 A4-70 stainless steel, plain
Spring plunger with thrust pin