Straight male fitting ISO 8434-1, zinc-nickel-plated steel, metric male thread with seal
Straight screw-in fitting ST metr. male EPDM seal.
TUBFITT-ISO8434-L-SDSC-E-ST-D10-M14X1.5
Register now and access more than 125,000 products
Datasheets(X)
 | |
Thread type x nominal diameter x pitch (T1) | M16 x 1.5 |
Thread type 2 x nominal diameter 2 x pitch 2 (T2) | M14 x 1.5 |
ISO | 8434 |
Nominal pressure PN | 500 |
Pipe diameter (D1) | 10 mm |
Diameter 2 (D2) | 7 mm |
Width across flats (S1) | 19 mm |
Width across flats 2 (S2) | 19 mm |
Material | Steel |
Surface | Zinc nickel |
Length (L1) | 38 mm |
Length 2 (L2) | 30 mm |
Length 3 (L3) | 11 mm |
Length 8 (i1) | 12 mm |
Last viewed
Tool assortment 22 pieces
pias® wing-type drilling screw, flat countersunk head with AW drive
Twist drill bit HSCo DIN 340 type RN OXIDE
Slotted cheese head DIN 84, brass, plain
Slotted impact bit 5/16 inch
Mounting clip For grid walls
Hexagonal nut, low profile ISO 4035 A4-035 stainless steel, plain
T-piece, reduced with solder connection EN1254, copper, 5130R
Twist drill bit HSCo DIN 338 MFD Speed
Safety sandal S1