Straight male fitting ISO 8434-1, zinc-nickel-plated steel, tapered BSPT male thread
Straight screw-in fitting ST tapered BSP male
TUBFITT-ISO8434-L-SDSC-ST-D10-R3/8
Register now and access more than 125,000 products
Datasheets(X)
 | |
Thread type x nominal diameter x pitch (T1) | M16 x 1.5 |
Thread type 3 x nominal diameter 3 (T2) | R3/8 |
ISO | 8434 |
Nominal pressure PN | 315 |
Pipe diameter (D1) | 10 mm |
Diameter 2 (D2) | 8 mm |
Width across flats (S1) | 19 mm |
Width across flats 2 (S2) | 19 mm |
Material | Steel |
Surface | Zinc nickel |
Length (L1) | 36 mm |
Length 2 (L2) | 28 mm |
Length 3 (L3) | 21 mm |
Length 8 (i1) | 12 mm |
Last viewed
TIPP® Smartlock GS ML pipe clamp Medium-load hinged and jointed clamp
FKM 75 Shore O-ring ISO 3601-1
HSCo8 end mill, long DIN 844L
Hammer drill bit multi-pack with SDS-plus drive arbor Duo-S Vario 12 pcs
Threaded rod with test certificate DIN 976-1, steel 10.9U, hot-dip galvanised
Cylindrical pin, hardened DIN 6325, steel, plain
Heat-resistant crepe masking tape +120 °C
Hexagon nut, inch
Flat washer with chamfer for high-strength fittings
Terminal block without wire guard