Straight pin with flat points DIN 7, steel plain (9 SMnPb 28 k or St 50 K), unhardened, tolerance class h8
DIN 7 h8, plain steel
PIN-CYL-DIN7-UNHDND-H8-1X3
Register now and access more than 125,000 products
DIN 7 was withdrawn and superseded by DIN EN ISO 2338 (changes made to length definition and dome heights).
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 1 mm |
Length (l1) | 3 mm |
Height of flat point (c) | 0.15 mm |
Standards | DIN 7 |
Material | Steel |
Surface | Plain |
Design | Unhardened |
Tolerance class | h8 |
RoHS-compliant | Yes |
Last viewed
Clamp with fastening lugs DIN 3017-2, shape B1, W1, BASIC-Line
Lock washer with right-angle cross-section, shape B DIN 127, steel, plain
Locking system, DPS
Flat washer with chamfer DIN EN ISO 7090, steel, hot-dip galvanised (hdg), hardness class 200 HV
Hexagonal bolt with shank DIN 931, steel 8.8, zinc-plated, blue passivated (A2K)
System workshop trolley PRO 8.4
Hexagonal bolt with shank
Threaded fitting
Concrete screw with pan head W-BS/S
Hexagonal nut, low profile with clamping piece (non-metal insert), imperial