Straight pin with flat points DIN 7, steel plain (9 SMnPb 28 k or St 50 K), unhardened, tolerance class h8
DIN 7 h8, plain steel
PIN-CYL-DIN7-UNHDND-H8-2X12
Register now and access more than 125,000 products
DIN 7 was withdrawn and superseded by DIN EN ISO 2338 (changes made to length definition and dome heights).
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 2 mm |
Length (l1) | 12 mm |
Height of flat point (c) | 0.3 mm |
Standards | DIN 7 |
Material | Steel |
Surface | Plain |
Design | Unhardened |
Tolerance class | h8 |
RoHS-compliant | Yes |
Last viewed
Frame Nova Pro Classic H90
Coloured rubber grommets made from polychloroprene rubber Insulating grommets, coloured, CR
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, plain
Metric combination wrench with POWERDRIV®
Hexagon head bolt with shank for pressure container construction (PED) ISO 4014, steel 25CrMo4, plain
HPC Speedcut 4.0 Inox end mill, long, four blades, uneven angle of twist gradient, with internal cooling, HB shank
Work dungarees
Screwless hose clamp low overall height
Flat connector Junior Power Timer (JPT) 2.8
Safety boots, S3