Straight pin with flat points DIN 7, steel plain (9 SMnPb 28 k or St 50 K), unhardened, tolerance class h8
DIN 7 h8, plain steel
PIN-CYL-DIN7-UNHDND-H8-3X40
Register now and access more than 125,000 products
DIN 7 was withdrawn and superseded by DIN EN ISO 2338 (changes made to length definition and dome heights).
Datasheets(X)
 | |
Nominal diameter (d1) | 3 mm |
Length (l1) | 40 mm |
Height of flat point (c) | 0.45 mm |
Standards | DIN 7 |
Material | Steel |
Surface | Plain |
Design | Unhardened |
Tolerance class | h8 |
RoHS-compliant | Yes |
Last viewed
Vehicle dry abrasive paper strip RED PERFECT®
HPC solid carbide drill Speeddrill 4.0-Inox, DIN 6537K, 3xD short, 4 drill heels, with internal cooling
SMART STEP EU+ HSS twist drill bit DIN 338
Solid carbide twist drill bit, internal cooling DIN 6537L
Hexagon head bolt with shank and fine thread ISO 8765, steel 10.9 zinc-plated thick-film passivated (ZSML)
Slotted countersunk head screw DIN 963, steel 4.8, nickel-plated (E2J)
Hexagon nut, high profile with clamping piece (non-metal insert), inch
Self-drilling façade construction screw Sandwich piasta® A2 stainless steel
TX bit with hole
Blind rivet, open, with break mandrel and flat head ISO 15983, dome head, A2/A2 stainless steel