Straight pin with flat points DIN 7, steel plain (9 SMnPb 28 k or St 50 K), unhardened, tolerance class h8
DIN 7 h8, plain steel
PIN-CYL-DIN7-UNHDND-H8-5X16
Register now and access more than 125,000 products
DIN 7 was withdrawn and superseded by DIN EN ISO 2338 (changes made to length definition and dome heights).
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 5 mm |
Length (l1) | 16 mm |
Height of flat point (c) | 0.75 mm |
Standards | DIN 7 |
Material | Steel |
Surface | Plain |
Design | Unhardened |
Tolerance class | h8 |
RoHS-compliant | Yes |
Last viewed
Identification rings, PVC
Plastic retaining plate EUROFAST® TRPL-45
Screw base with detent for cable ties with tab
Profile half cylinder EPS
Screw plug GPN 700 For pipe thread
Pan head tapping screw, shape C with AW drive
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head and hexalobular drive
Stud with threaded end ≈ 1.25 d DIN 939, steel 8.8, zinc-plated, blue passivated (A2K)
PVC single core H05/H07V-K, fine wire
Divider assortment With compartment rails and compartment dividers for system dimensions 16.6