Straight pin with flat points DIN 7, steel plain (9 SMnPb 28 k or St 50 K), unhardened, tolerance class h8
DIN 7 h8, plain steel
PIN-CYL-DIN7-UNHDND-H8-6X30
Register now and access more than 125,000 products
DIN 7 was withdrawn and superseded by DIN EN ISO 2338 (changes made to length definition and dome heights).
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 6 mm |
Length (l1) | 30 mm |
Height of flat point (c) | 0.9 mm |
Standards | DIN 7 |
Material | Steel |
Surface | Plain |
Design | Unhardened |
Tolerance class | h8 |
RoHS-compliant | Yes |
Last viewed
1/4" socket wrench insert metric, long
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Edge protection
Tool assortment 37 pieces in system case
1/4 inch socket wrench insert, metric short
Spirit level with magnets
Jacket Planam Canvas 320
Hexagonal bolt with shank DIN 601/ISO 4016, steel 4.8, zinc-plated, blue passivated (A2K), with nut
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Pull handle ST/A100