Straight push-in fitting with hexagon
Straight push-in fitting hex. M/G thread
PSHINFITT-SR-HEX-PLA-ET-G1/2-PIP-14
Register now and access more than 125,000 products
Datasheets(X)
- Compressed air systems
- Automation technology
- Automotive industry
- Packaging industry
 | |
Material | Plastic |
Material of housing | Brass |
Surface of the housing | Nickel plated |
Material of gasket | Nitrile butadiene rubber (NBR) |
Material of screwing thread | Brass |
Surface of the screwing thread | Nickel plated |
Form | Straight |
Drive type | Outer hexagon |
Min./max. working pressure | -0.95-10 bar |
Min./max. operating temperature | -20 to 80 °C |
Thread type x nominal diameter (d1) | G1/2 |
Suitable for hose external diameter (Fs) | 14 mm |
Length (l1) | 34.9 mm |
Length 2 (l2) | 24.3 mm |
Thread length (lg) | 9.5 mm |
Width across flats (s1) | 24 mm |
Last viewed
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, zinc-plated, blue passivated (A2K)
Cut-resistant glove Ejendals TEGERA® 815
Sundström upper frame half for SR 200
Line marking cart spray head
EPS profile thumbturn cylinder
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt with thread up to the head
Hose clamp ABA Original, W5
Cylindrical pin, unhardened DIN 7, A4 stainless steel, plain
Round-head grooved pin