Straight reducer fitting ISO 8434-1, zinc-nickel-plated steel
Straight reducing fitting steel
TUBFITT-ISO8434-S-RDS-ST-D20/D12
Register now and access more than 125,000 products
Datasheets(X)
 | |
Thread type x nominal diameter x pitch (T1) | M30 x 2 |
Thread type 2 x nominal diameter 2 x pitch 2 (T2) | M20 x 1.5 |
ISO | 8434 |
Nominal pressure PN | 420 |
Pipe diameter (D1) | 20 mm |
Diameter 2 (D2) | 16 mm |
Diameter 3 (D3) | 12 mm |
Width across flats (S1) | 32 mm |
Material | Steel |
Surface | Zinc nickel |
Length 2 (L2) | 40 mm |
Length 3 (L3) | 22 mm |
Last viewed
HSCo8 keyway end mill, short, triple blade, centre-cutting
Single-handed grease gun With variable pressure setting directly on handle
Helical insert W.TEC® INSERT COIL Screw Grip fine thread
Slotted nut, hardened and ground with fine thread
3/8" socket wrench insert Inch, hexagon, short
adjustable clamp for ISO C clamping system
Milling bit Ruko tungsten carbide milling bit type A cylinder (ZYAS) with spur cut TiCN
Tap wrench DIN 1814 Performance, adjustable
Hexagonal bolt with flange DIN 6921, steel 10.9, zinc-plated, blue passivated (A2K)
Work shorts