Straight reducer fitting ISO 8434-1, zinc-nickel-plated steel
Straight reducing fitting steel
TUBFITT-ISO8434-S-RDS-ST-D8/D6
Register now and access more than 125,000 products
Datasheets(X)
 | |
Thread type x nominal diameter x pitch (T1) | M16 x 1.5 |
Thread type 2 x nominal diameter 2 x pitch 2 (T2) | M14 x 1.5 |
ISO | 8434 |
Nominal pressure PN | 800 |
Pipe diameter (D1) | 8 mm |
Diameter 2 (D2) | 4 mm |
Diameter 3 (D3) | 6 mm |
Width across flats (S1) | 17 mm |
Material | Steel |
Surface | Zinc nickel |
Length 2 (L2) | 32 mm |
Length 3 (L3) | 18 mm |
Last viewed
Sleeve connector For Stapa-Steck-WESF steel-armoured pipe
Accessory set for drilling stand assembly For the modular core drill system
Work trousers
Tapered pin with female thread, unhardened DIN 7978, plain steel, unhardened
Safety sandals, S1P
Hexagon nut, low profile with fine thread DIN 439, steel 4, plain
Hexagonal bolt with thread up to the head
Blind rivet, open, with break mandrel and flat head ISO 15977, dome head, aluminium/steel
Basic trousers
RED PERFECT® 3D non-woven lamella flap disc for direct use on angle grinders